Huawei quidway s3526 series User Manual

Command Manual - Network Protocol
Quidway S3500 Series Ethernet Switches Chapter 5 DHCP Relay Configuration Commands
Huawei Technologies Proprietary
5-1
Chapter 5 DHCP Relay Configuration Commands
 Note:
This chapter only applies to S3526/S3526 FM/S3526 FS in S3500 series switches.
5.1 DHCP Relay Configuration Commands
5.1.1 address-check
Syntax
address-check enable
address-check disable
View
VLAN interface view
Parameter
None
Description
Using address-check enable command, you can enable the security features of
DHCP relay and enable the user address validity check on VLAN interface. Using
address-check disable command, you can disable the security features of DHCP
relay and disable the user address validity check on VLAN interface.
By default, the switch disables DHCP security features function.
Example
# Enable the security features of DHCP relay on VLAN1 interface.
[Quidway-Vlan-interface1] address-check enable
5.1.2 debugging dhcp-relay
Syntax
debugging dhcp-relay
undo debugging dhcp-relay

Huawei quidway s3526 series Specifications

General

Brand	Huawei
Model	quidway s3526 series
Category	Network Router
Language	English