Huawei quidway s3526 series User Manual

Command Manual - Network Protocol
Quidway S3500 Series Ethernet Switches Chapter 8 BOOTP Client Configuration Commands
Huawei Technologies Proprietary
8-2
Parameter
vlan-id: VLAN interface ID.
vlan-interface vlan_id: Display BOOTP client information of specified VLAN interface.
Description
Using the display bootp client command, you can view the information about BOOTP
client, including its MAC address and the applied IP address etc.
Example
# Display the information about BOOTP client.
[Quidway] display bootp client interface vlan-interface 1
Vlan-interface1:
Allocated IP: 169.254.0.2 255.255.0.0
Transaction ID = 0x3d8a7431
Mac Address 00e0-fc0a-c3ef
Table 8-1 Display information description of display bootp client
Field Description
Vlan-interface1 Configure VLAN interface 1 to obtain IP address using BOOTP
Transaction ID XID filed value in BOOTP packet
8.1.3 ip address bootp-alloc
Syntax
ip address bootp-alloc
undo ip address bootp-alloc
View
VLAN interface view
Parameter
None
Description
Using the ip address bootp-alloc command, you can configure VLAN interface to
obtain IP address using BOOTP. Using the undo ip address bootp-alloc command,
you can remove the configuration.
By default, the VLAN interface does not obtain IP address using BOOTP.
For the related command, see display bootp client.

Huawei quidway s3526 series Specifications

General

Brand	Huawei
Model	quidway s3526 series
Category	Network Router
Language	English