Huawei quidway s3526 series User Manual

Command Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches Chapter 6 Route Capacity Configuration Commands
Huawei Technologies Proprietary
6-3
Table 6-2 The description for the information displayed by the display memory limit
command
Item Description
system memory
safety
The safety value of the Ethernet switch memory.
system memory limit The lower limit of the Ethernet switch memory.
auto-establish
enabled
The system allows recovering the connection
automatically. (If the automatic recover is disabled, the
"auto-establish disabled" will be displayed.)
Free Memory The size of the current idle memory.
The times of
disconnect: 0
The times of the connection disconnecting of the Ethernet
switch is 0.
The times of
reconnect: 0
The times of the connection reestablishment of the
Ethernet switch is 0.
The current state:
Normal
The current state is normal. (If entering the emergent state,
the system will display "Exigence" )
6.1.3 memory auto-establish disable
Syntax
memory auto-establish disable
View
System view
Parameter
None
Description
Using memory auto-establish disable command, you can disable the routing protocol
connection that is forcibly disconnected to recover automatically when the idle memory
of the Ethernet switch reaches this value. Thus, connections of all the routing protocols
will not recover when the idle memory of the Ethernet switch recovers to a safety value.
In this case, you need to restart the routing protocol to recover the connections.
By default, when the idle memory of the Ethernet switch recovers to a safety value,
connections of all the routing protocols will always recover (when the idle memory of
the Ethernet switch reduces to a lower limit, the connection will be disconnected
forcibly).
You shall use the command cautiously.

Huawei quidway s3526 series Specifications

General

Brand	Huawei
Model	quidway s3526 series
Category	Network Router
Language	English