Command Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches Chapter 5 IP Routing Policy Configuration Commands
Huawei Technologies Proprietary
5-9
Parameter
acl-number: Number of the access control list used for matching the destination
address field of the routing information.
ip-prefix-name: Address prefix list used for matching the routing information destination
address field.
protocol: The routing information of which kind of route protocol to be filtered.
Description
Using filter-policy export command, you can configure to set the filtering conditions of
the routing information advertised by a certain type of routing protocols. Using undo
filter-policy export command, you can cancel the filtering conditions set.
By default, the advertised routing information is not filtered.
In some cases, it may be required that only the routing information meeting some
conditions can be advertised. Then, the filter-policy command can be used to set the
filtering conditions for the routing information to be advertised. Only the routing
information passing the filtration can be advertised.
For the related commands, see filter-policy import.
Example
# Define the filtering rules for advertising the routing information of RIP. Only the routing
information passing the filtering of address prefix list p1 will be advertised by RIP.
[Quidway-rip] filter-policy ip-prefix p1 export
5.1.12 filter-policy import
Syntax
filter-policy gateway ip-prefix-name import
undo filter-policy gateway ip-prefix-name import
filter-policy { acl-number | ip-prefix ip-prefix-name } import
undo filter-policy { acl-number | ip-prefix ip-prefix-name } import
View
Routing protocol view
Parameter
acl-number: The access control list number used for matching the destination address
field of the routing information.
ip-prefix ip-prefix-name: The prefix address list name. Its matching object is the
destination address field of the routing information.
To Next Page
Loading...
Need help?
General
