Huawei quidway s3526 series

Command Manual - Security
Quidway S3500 Series Ethernet Switches Chapter 2 Portal Configuration Commands
Huawei Technologies Proprietary
2-2
2.1.2 display portal
Syntax
display portal [ acm statistics | auth-network [ auth-vlan-id ] | free-ip | free-user |
server [ server-name | statistics ] | tcp-cheat statistics | user [ ip ipaddress | port
portIndex ] | vlan [ vlan-id ] ]
View
Any view
Parameter
acm statistics: Displays ACM statistics, that is, the statistics of the states related to
authentication, connection and management .
auth-network auth-vlan-id: Displays the authentication network segments.
auth-vlan-id is the ID of the VLAN where the port of a switch is located for an
authenticated user’s cross-segment access.
free-ip: Displays configured authentication-free IP addresses.
free-user: Displays configured authentication-free users.
server server-name: Displays the information about the specified Portal server.
server statistics: Displays the Portal server statistics.
tcp-cheat statistics: Displays TCP spoofing statistics.
ipaddress: Displays the information about a user with the specified IP address.
portIndex: Displays the user information about a specified logic port ID. Logic port 0
corresponds to physical port Ethernet 0/1; logic port 1 to physical port Ethernet 0/2. The
rest may be deduced by analogy.
vlan vlan-id: Displays the information about a user within a VLAN.
Description
Use the display portal command to display Portal information.
Example
# Display Portal information.
<Quidway> display portal
This operation may take few minutes ,please wait
Run Method:
Direct
Free IP:
1)IP = 192.168.0.200 Net Mask = 255.255.255.255
Authenticate network:
1)IP = 1.1.1.1 Net Mask = 255.255.0.0 VLAN = 3