Huawei quidway s3526 series User Manual

Command Manual - Network Protocol
Quidway S3500 Series Ethernet Switches Chapter 2 ARP Configuration Commands
Huawei Technologies Proprietary
2-4
View
System view
Parameter
limit-value: the maximum number of ARP requests within 5-second interval, ranging
from 2 to 1024. The default value is 10.
Description
Using arp source-suppression limit command, you can configure the maximum
number of ARP requests within 5-second interval. Using undo arp
source-suppression limit command, you can restore the maximum number of ARP
requests within 5 seconds to default.
For the related command, see display arp source-suppression.
In S3500 Series Ethernet Switches, only S3552G, S3552P, S3528G, S3528P and
S3552F supports this command.
Example
# Configure the maximum number of ARP requests within 5-second interval is 100.
[Quidway] arp source-suppression limit 100
2.1.6 arp timer probe
Syntax
arp timer probe time
undo arp timer probe
View
VLAN interface view
Parameter
time: Interval of ARP timed probing, which is in the range of 5 to 1200 seconds. By
default, the interval is 5 seconds.
Description
Using arp timer probe command, you can configure the ARP probing interval. Using
undo arp timer probe command, you can restore the default ARP probing interval.
In S3500 Series Ethernet Switches, only S3526, S3526 FM, S3526 FS supports this
command.
For the related command, see display arp probe.

Huawei quidway s3526 series Specifications

General

Brand	Huawei
Model	quidway s3526 series
Category	Network Router
Language	English