Command Manual - Security
Quidway S3500 Series Ethernet Switches Chapter 3 AAA & RADIUS Protocol Configuration Commands
Huawei Technologies Proprietary
3-1
Chapter 3 AAA & RADIUS Protocol Configuration
Commands
3.1 AAA Configuration Commands
3.1.1 access-limit
Syntax
access-limit { disable | enable max-user-number }
undo access-limit
View
ISP domain view
Parameter
disable: No limit to the supplicant number in the current ISP domain.
enable max-user-number: Specifies the maximum supplicant number in the current
ISP domain, ranging from 1 to 1024.
Description
Using access-limit command, you can configure a limit to the amount of supplicants in
the current ISP domain. Using undo access-limit command, you can restore the limit
to the default setting.
By default, there is no limit to the amount of supplicants in the current ISP domain.
The access-limit command limits the amount of supplicants contained in the current
ISP domain. The supplicants may contend for the network resources. So setting a
suitable limit to the amount will guarantee the reliable performance for the existing
supplicants.
Example
# Set a limit of 500 supplicants for the ISP domain named huawei163.net.
[Quidway-isp-huawei163.net] access-limit enable 500
To Next Page
Loading...
Need help?
General
