Command Manual - Network Protocol
Quidway S3500 Series Ethernet Switches Chapter 7 DHCP Snooping Configuration Commands
Huawei Technologies Proprietary
7-1
Chapter 7 DHCP Snooping Configuration
Commands
Note:
This chapter only applies to S3552G, S3552P, S3528G, S3528P, S3552F, S3526E,
S3526E FM, S3526E FS and S3526C in S3500 series switches.
7.1 DHCP Snooping Configuration Commands
7.1.1 dhcp-snooping
Syntax
dhcp-snooping
undo dhcp-snooping
View
System view
Parameter
None
Description
Use the dhcp-snooping command to enable DHCP snooping function on the switch.
Use the undo dhcp-snooping command to disable this function.
By default, DHCP snooping function is not enabled.
Related command: display dhcp-snooping.
Note that:
You must first disable DHCP relay (no DHCP server is configured on any Layer 3 port)
before enabling DHCP snooping on the switch.
Example
# Enable DHCP snooping.
<Quidway> system-view
To Next Page
Loading...
