Huawei quidway s3526 series User Manual

Command Manual - System Management
Quidway S3500 Series Ethernet Switches Chapter 3 Device Management Commands
Huawei Technologies Proprietary
3-3
19% in last 1 minute
19% in last 5 minutes
Table 3-1 Display information
Field Description
CPU busy status. The busy status of switch
18% in last 5 seconds
19% in last 1 minute
19% in last 5 minutes
The CPU occupancy rate is 18% at last 5 seconds
The CPU occupancy rate is 19% at last 1 minute
The CPU occupancy rate is 19% at last 5 minutes
3.1.5 display device
Syntax
display device
View
Any view
Parameter
None
Description
Using display device command, you can view module type and working status
information of each card (including main card and daughter-card).
Perform display device command to display the module type and working status
information of a card, including physical card number, physical daughter card number,
number of ports, hardware version number, FPGA version number, BOOTROM
software version number, application version number, address learning mode, interface
card type and interface card type description, etc.
Example
# Show the card information.
<Quidway> display device
SlotNo SubSNo PortNum PCBVer FPGAVer CPLDVer BootRomVer AddrLM Type
0 0 24 REV.0 001 002 360 IVL MAIN
The following table describes the displaying information.

Huawei quidway s3526 series Specifications

General

Brand	Huawei
Model	quidway s3526 series
Category	Network Router
Language	English