Command Manual - Network Protocol
Quidway S3500 Series Ethernet Switches Chapter 7 DHCP Snooping Configuration Commands
Huawei Technologies Proprietary
7-3
Related command: dhcp-snooping.
Example
# Display the association table recorded by DHCP snooping.
<Quidway> display dhcp-snooping
Type IP Address MAC Address Lease VLAN Interface
====================================================================
dynamic 202.38.12.45 00e0-fc00-0006 286 1 Ethernet1/0/1
Table 7-1 Description on the fields of the display dhcp-snooping command
Field Description
Type Binding type
IP Address User IP address allocated by the DHCP server
MAC Address MAC address
Lease Lease time of the IP address
VLAN VLAN where the switch port for the user belong
Interface The switch port to which the user is connected
7.1.4 display dhcp-snooping trust
Syntax
display dhcp-snooping trust
View
Any view
Parameter
None
Description
Using display dhcp-snooping trust command, you can view the status of the
DHCP-Snooping function and the information about the trusted ports.
For the related command, see dhcp-snooping trust.
Example
# Display the status of the DHCP-Snooping function and the information about the
trusted ports.
<Quidway> display dhcp-snooping trust
dhcp-snooping is enabled