Huawei quidway s3526 series User Manual

Command Manual - Integrated Management
Quidway S3500 Series Ethernet Switches Chapter 1 Stack Function Configuration Commands
Huawei Technologies Proprietary
1-3
Example
# Switch from master switch Quidway to slave Switch1, perform the configuration on
Switch1 and then switch back to the master switch.
<stack_0.Quidway> stacking 1
<stack_1.Quidway>
<stack_1.Quidway> quit
<stack_0.Quidway>
1.1.3 stacking enable
Syntax
stacking enable
undo stacking enable
View
System view
Parameter
None
Description
Using stacking enable command, you can establish a stack. Using undo stacking
enable command, you can cancel the stack.
After entering this command, the system will automatically add the switches connected
to the stack ports of the master switch to the stack. User can only operate on the master
switch to delete a stack.
After a stack has been established, the slave switch will exit the stack automatically if
the stack port is disconnected.
Example
# Establish a stack.
[Quidway] stacking enable
1.1.4 stacking ip-pool
Syntax
stacking ip-pool from-ip-address ip-address-number [ ip-mask ]
undo stacking ip-pool

Huawei quidway s3526 series Specifications

General

Brand	Huawei
Model	quidway s3526 series
Category	Network Router
Language	English