Command Manual - Getting Started
Quidway S3500 Series Ethernet Switches Chapter 1 Logging in Switch Commands
Huawei Technologies Proprietary
1-1
Chapter 1 Logging in Switch Commands
1.1 Logging in Switch Commands
1.1.1 authentication-mode
Syntax
authentication-mode { password | scheme | none }
View
User interface view
Parameter
password: Perform local password authentication.
scheme: Perform local or remote authentication of username and password.
none: Perform no authentication.
Description
Using authentication-mode command, you can configure the authentication method
for login user.
This command with the password parameter indicates to perform local password
authentication, that is, you need to configure a login password using the set
authentication password { cipher | simple } password command.
This command with the scheme parameter indicates to perform authentication of local
or remote username and password. The type of the authentication depends on your
configuration. For detailed information, see “Security” section.
By default, users logging in via the Console port do not need to pass any terminal
authentication, whereas the password is required for authenticating the Modem and
Telnet users when they log in.
Example
# Configure local password authentication.
[Quidway-ui-aux0] authentication-mode password
1.1.2 auto-execute command
Syntax
auto-execute command text
To Next Page
Loading...
Need help?
General
