Command Manual - System Management
Quidway S3500 Series Ethernet Switches Chapter 7 NTP Configuration Commands
Huawei Technologies Proprietary
7-1
Chapter 7 NTP Configuration Commands
7.1 NTP Configuration Commands
7.1.1 debugging ntp-service
Syntax
debugging ntp-service { access | adjustment | authentication | event | filter |
packet | parameter | refclock | selection | synchronization | validity | all }
undo debugging ntp-service { access | adjustment | authentication | event | filter |
packet | parameter | refclock | selection | synchronization | validity | all }
View
User view
Parameter
access: NTP access control debugging.
adjustment: NTP clock adjustment debugging.
all: All NTP debugging functions.
authentication: NTP authentication debugging.
event: NTP event debugging.
filter: NTP filter information debugging.
packet: NTP packet debugging.
parameter: NTP clock parameter debugging.
refclock: NTP reference clock debugging.
selection: NTP clock selection information debugging.
synchronization: NTP clock synchronization information debugging.
validity: NTP remote host validity debugging.
Description
Using debugging ntp-service command, you can debug different NTP services. Using
undo debugging ntp-service command, you can disable corresponding debugging
function.
By default, no debugging function is enabled.
To Next Page
Loading...
Need help?
General
