Command Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-2
Example
# Aggregate the two network segments, 66.48.10.0 and 66.48.120.0, in OSPF area 1
into one summary route 66.48.0.0 and transmit it to other areas.
[Quidway-ospf] area 1
[Quidway-ospf-area-0.0.0.1] network 66.48.10.0 0.0.0.255
[Quidway-ospf-area-0.0.0.1] network 66.48.120.0 0.0.0.255
[Quidway-ospf-area-0.0.0.1] abr-summary 66.48.0.0 255.255.0.0
3.1.2 area
Syntax
area area-id
undo area area-id
View
OSPF view
Parameter
area-id: ID of the OSPF area, which can be a decimal integer or in IP address format.
Description
Using area command, you can enter OSPF Area view. Using undo area command,
you can cancel the designated area.
Example
# Enter OSPF Area 0 view.
[Quidway-ospf] area 0
[Quidway-ospf-area-0.0.0.0]
3.1.3 asbr-summary
Syntax
asbr-summary ip-address mask [ not-advertise | tag value ]
undo asbr-summary ip-address mask
View
OSPF view
Parameter
ip-address: Matched IP address.
To Next Page
Loading...
