Command Manual - QoS/ACL
Quidway S3500 Series Ethernet Switches Chapter 2 QoS Commands
Huawei Technologies Proprietary
2-44
2.3.11 display qos-interface traffic-limit
Syntax
display qos-interface [ interface-name | interface-type interface-num ] traffic-limit
View
Any view
Parameter
interface-name | interface-type interface-num: Port of the switch
Description
Using the display qos-interface traffic-limit command, you can view traffic limit
configuration, including the corresponding ACL, committed information rate, committed
burst size, peak information rate and monitor action configuration.
For the related command, see traffic-limit.
Example
# Display traffic limit configuration.
<Quidway> display qos-interface traffic-limit
2.3.12 display qos-interface traffic-priority
Syntax
display qos-interface [ interface-name | interface-type interface-num ] traffic-priority
View
Any view
Parameter
interface-name | interface-type interface-num: Port of the switch
Description
Using the display qos-interface traffic-priority command, you can view priority
re-labeling configuration, including the corresponding ACL, priority type and priority
level.
For the related command, see traffic-priority.
Example
# Display priority re-labeling configuration.
<Quidway> display qos-interface traffic-priority