Huawei quidway s3526 series

Command Manual - Network Protocol
Quidway S3500 Series Ethernet Switches Chapter 5 DHCP Relay Configuration Commands
Huawei Technologies Proprietary
5-4
5.1.4 dhcp-server
Syntax
dhcp-server groupNo
undo dhcp-server
View
VLAN interface view
Parameter
groupNo: DHCP Server group number; ranging from 0 to 19.
Description
Using dhcp-server command, you can configure the native DHCP Server group of
VLAN interface. Using undo dhcp-server command, you can cancel the VLAN
interface from its native DHCP Server group.
For the related command, see dhcp-server ip, display dhcp-server, display
dhcp-server interface vlan-interface, debugging dhcp-relay.
Example
# Add VLAN-Interface 1 to DHCP Server group1.
[Quidway-Vlan-interface1] dhcp-server 1
5.1.5 dhcp-server detect
Syntax
dhcp-server detect
undo dhcp-server detect
View
System view
Parameter
None
Description
Using dhcp-server detect command, you can enable DHCP pseudo-server detection.
Using undo dhcp-server detect command, you can disable DHCP pseudo-server
detection.