Huawei quidway s3526 series User Manual

Command Manual - System Management
Quidway S3500 Series Ethernet Switches Chapter 4 System Maintenance Commands
Huawei Technologies Proprietary
4-30
Parameter
size: Configure the size of the trap buffer.
buffersize: Size of trap buffer (numbers of messages).
channel: Configure the channel to output information to trap buffer.
channel-number: Channel number, ranging from 0 to 9, that is, the system has ten
channels.
channel-name: Specify the channel name.
Description
Using info-center trapbuffer command, you can output information to the trap buffer.
Using undo info-center trapbuffer command, you can cancel output information to
trap buffer.
By default, output information is transmitted to trap buffer and size of trap buffer is 20.
This command takes effect only after the system logging is enabled.
For the related commands, see info-center enable, display info-center.
Example
# Send information to the trap buffer and sets the size of buffer as 30.
[Quidway] info-center trapbuffer size 30
4.5.14 reset logbuffer
Syntax
reset logbuffer
View
User view
Parameter
None
Description
Using reset logbuffer command, you can reset information in log buffer.
Example
# Clear information in log buffer.
<Quidway> reset logbuffer

Huawei quidway s3526 series Specifications

General

Brand	Huawei
Model	quidway s3526 series
Category	Network Router
Language	English