Command Manual - QoS/ACL
Quidway S3500 Series Ethernet Switches Chapter 1 ACL Commands
Huawei Technologies Proprietary
1-7
1.1.6 reset acl counter
Syntax
reset acl counter { all | acl-number | acl-name }
View
User view
Parameter
all: All the access lists (including numbered and named access lists).
acl-number: Specifies an access list with a number in the range of 2000 to 3999.
acl-name: Specifies an access list with a character string, beginning with English letters
[a-z, A-Z] only, excluding space and quotation marks, and not case sensitive. The all
and any keywords are not allowed.
Description
Using the reset acl counter command, you can reset the statistics information of the
ACL which is used to filter or classify the data treated by the software of switch. You can
clear the matched counters to zero using this command.
Table 1-5 The comparison between reset commands of statistics information
Command Function
reset acl counter
Reset the statistics information of the ACL which is used in
the case of filtering or classifying the data treated by the
software of switch. The case includes: ACL cited by route
policy function, ACL used for control logon user, etc. The
ACL number ranges from 2000 to 3999.
reset traffic-statistic
Reset statistic information of traffic. This command is used
in the case of filtering or classifying the data transmitted by
the hardware of switch. Commonly, this command is used
to reset the statistics information of the traffic-statistic
command.
Example
# Clear the statistics information of ACL 2000.
<Quidway> reset acl counter 2000
To Next Page
Loading...
Need help?
General
