Command Manual - QoS/ACL
Quidway S3500 Series Ethernet Switches Chapter 2 QoS Commands
Huawei Technologies Proprietary
2-49
cos-value6: 802.1p priority value corresponding to Local-precedence 6, in the range of
0~7
cos-value7: 802.1p priority value corresponding to Local-precedence 7, in the range of
0~7
Description
Using the local-precedence command, you can configure the “Local-precedence +
Conform-level → 802.1p priority” mapping table of a conform-level. Using the undo
local-precedence command, you can restore its default values.
You must enter a specific conform-level view to configure the “Local-precedence +
Conform-level → 802.1p priority” mapping table of that level. For example, when you
enter conform-level 0 view, you can only modify the mapping table of conform-level 0.
Example
# Configure “Local-precedence + Conform-level → 802.1p priority” mapping table of
conform-level 0.
[Quidway-conform-level-0] local-precedence 0 1 2 3 5 5 6 7
The following is a configured “Local-precedence + Conform-level → 802.1p priority”
mapping table.
Table 2-20 “Local-precedence + Conform-level → 802.1p priority” mapping table
Local-precedence CL 802.1p
0 0 0
1 0 1
2 0 2
3 0 3
4 0 5
5 0 5
6 0 6
7 0 7
2.3.18 mirrored-to
Syntax
mirrored-to inbound acl-rule { cpu | monitor-interface }
undo mirrored-to inbound acl-rule
To Next Page
Loading...
