Command Manual - QoS/ACL
Quidway S3500 Series Ethernet Switches Chapter 1 ACL Commands
Huawei Technologies Proprietary
1-3
1.1.2 display acl config
Syntax
display acl config { all | acl-number | acl-name }
View
Any view
Parameter
all: Configures to display all the ACLs (including numbered and named ACLs).
acl-number: Specifies the sequence number of the ACL to be displayed with a number
between 2000 and 3999.
acl-name: Specifies the name of the ACL to be displayed with a character string starting
with English letters ([a-z, A-Z]) only and excluding space or quotation mark.
Description
Using display acl config command, you can view the detail configuration information
about the ACL, including all the statements and sequence numbers and how many
packets and bytes matched these statements. The matched information is the
information treated by switch’s CPU. The matched information of transmitted data can
be displayed by display qos-global traffic-statistic command.
Example
# Display the content of all the ACLs.
<Quidway> display acl config all
Basic ACL 2010, 1 rule,
rule 1 permit 10.0.0.1 0 (0 times matched)
Basic ACL 2020, 1 rule,
rule 2 permit 20.0.0.1 0 (0 times matched)
Basic ACL std1, 2 rules,
rule 1 permit 20.0.0.1 0 (0 times matched)
rule 2 permit 30.0.0.1 0 (0 times matched)
To Next Page
Loading...
Need help?
General
