Huawei quidway s3526 series User Manual

Command Manual - Network Protocol
Quidway S3500 Series Ethernet Switches Chapter 5 DHCP Relay Configuration Commands
Huawei Technologies Proprietary
5-5
Example
# Enable DHCP pseudo-server detection.
[Quidway] dhcp-server detect
5.1.6 dhcp-server ip
Syntax
dhcp-server groupNo ip ipaddress1 [ ipaddress2 ]
undo dhcp-server groupNo
View
System view
Parameter
groupNo: DHCP Server group number; the valid groupNo ranges from 0 to 19.
ipaddress1: IP address of the master DHCP Server in the group.
ipaddress2: IP address of the slave DHCP Server in the group.
Description
Using dhcp-server ip command, you can configure the IP address of DHCP Server
adopted by the DHCP Server group. Using undo dhcp-server ip command, you can
cancel the IP addresses all the DHCP Servers in DHCP Server group.
For the related command, see dhcp-server, display dhcp-server, debugging
dhcp-relay.
Example
# Configure IP addresses of the master/slave DHCP Server of DHCP Server group1 as
1.1.1.1 and 2.2.2.2 respectively.
[Quidway] dhcp-server 1 ip 1.1.1.1 2.2.2.2
# Delete the IP addresses of the master/slave DHCP Server in DHCP Server group1.
[Quidway] undo dhcp-server 1
5.1.7 display dhcp-security
Syntax
display dhcp-security [ ip_address ]
View
Any view

Huawei quidway s3526 series Specifications

General

Brand	Huawei
Model	quidway s3526 series
Category	Network Router
Language	English