Command Manual - Network Protocol
Quidway S3500 Series Ethernet Switches Chapter 2 ARP Configuration Commands
Huawei Technologies Proprietary
2-9
Description
Using display arp probe command, you can view the ARP timed probing information,
including IP addresses requiring ARP probing and the probing interval.
In S3500 Series Ethernet Switches, only S3526, S3526 FM, S3526 FS supports this
command.
For the related commands, see arp probe ip, arp timer probe.
Example
# Display the ARP timed probing information on the interface VLAN1.
[Quidway] display arp probe interface vlan-interface 1
Interface Vlan-interface1
Probe Timer: 5 seconds
Probe IP address:
10.110.50.1
Table 2-3 Output description of the display arp probe display
Field Description
Interface Vlan-interface1 VLAN interface
Probe Timer Interval of ARP timed probing
Probe IP address IP address requiring ARP timed probing
2.1.12 display arp source-suppression
Syntax
display arp source-suppression
View
Any view
Parameter
None
Description
Using display arp source-suppression command, you can view ARP source
suppression information.
Example
# Display ARP source suppression information.
<Quidway> display arp source-suppression