Huawei quidway s3526 series User Manual

Command Manual - Security
Quidway S3500 Series Ethernet Switches Chapter 3 AAA & RADIUS Protocol Configuration Commands
Huawei Technologies Proprietary
3-11
Example
# Add a local user named huawei1.
[Quidway] local-user huawei1
[Quidway-luser-huawei1]
3.1.10 local-user password-display-mode
Syntax
local-user password-display-mode { cipher-force | auto }
undo local-user password-display-mode
View
System view
Parameter
cipher-force: Forced cipher mode specifies that the passwords of all the accessed
users must be displayed in cipher text.
auto: The auto mode specifies that a user is allowed to use the password command to
set a password display mode.
Description
Using local-user password-display-mode command, you can configure the
password display mode of all the accessing users. Using undo local-user
password-display-mode command, you can cancel the password display mode that
has been set for all the accessing users.
If cipher-force has been adopted, the user efforts of specifying to display passwords in
simple text will render useless.
The password display mode of all the accessing users defaults to auto.
For the related commands, see display local-user , password.
Example
# Force all the accessing users to display passwords in cipher text.
[Quidway] local-user password-display-mode cipher-force
3.1.11 messenger
Syntax
messenger time { enable limit interval | disable }
undo messenger time

Huawei quidway s3526 series Specifications

General

Brand	Huawei
Model	quidway s3526 series
Category	Network Router
Language	English