Command Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-13
Field Description
Authtype Authentication type of OSPF
Routing preference
Routing preference of OSPF. The internal route of OSPF
includes intra/inter area route, and its default routing
preference is 10. While that of the external route of OSPF
is 150 by default
Default ASE
parameters
Default ASE parameters of OSPF, including metric, type
and tag
SPF computation
count
SPF computation count since OSPF is enabled
Area Count Areas for connection to this router
Nssa Area Count Number of NSSA areas
SPF scheduled SPF scheduled (flag)
Interface Interface name belonging to this area
Cost Cost of routes
State State information
Type Network type of OSPF interface
Priority Priority
Designated Router IP address of designated router (DR)
Backup Designated
Router
IP address of backup designated router (BDR)
OSPF timers, defining as follows:
Hello Interval of hello packet
Dead Interval of dead neighbors
Poll Interval of poll
Timers
Retransmit Interval of retransmitting LSA
Transmit Delay Delay time of transmitting LSA
3.1.16 display ospf cumulative
Syntax
display ospf cumulative
View
Any view
To Next Page
Loading...
Need help?
General
