Command Manual - Multicast
Quidway S3500 Series Ethernet Switches Chapter 5 PIM Configuration Commands
Huawei Technologies Proprietary
5-11
View
Interface view
Parameter
None
Description
Using pim dm command, you can enable PIM-DM. Using undo pim dm command,
you can disable PIM-DM.
By default, PIM-DM is disabled.
Once enabled PIM-DM on an interface, PIM-SM cannot be enabled on the same
interface and vice versa.
Example
# Enable PIM DM on VLAN-interface10 of the Ethernet switch.
[Quidway] multicast routing-enable
[Quidway-Vlan-interface10] pim dm
5.1.14 pim sm
Syntax
pim sm
undo pim sm
View
Interface view
Parameter
None
Description
Using pim sm command, you can enable the PIM-SM protocol on an interface. Using
undo pim sm command, you can disable the PIM-SM protocol.
By default, PIM-SM is disabled.
Once enabled PIM-SM on an interface, PIM-DM cannot be enabled on the same
interface and vice versa.
Example
# Enable PIM-SM on VLAN-interface10.
[Quidway-Vlan-interface10] pim sm