Huawei quidway s3526 series

Command Manual - Auto Detecting
Quidway S3500 Series Ethernet Switches Chapter 1 Auto Detect Configuration Commands
Huawei Technologies Proprietary
1-6
System View: return to User View with Ctrl+Z.
[Quidway] detect-group 10
[Quidway-detect-group-10] timer loop 60
1.1.7 timer wait
Syntax
timer wait seconds
View
Detecting group views
Parameter
seconds: Specifies the timeout time of a detection, which ranges from 1 to 30 (in
seconds) and defaults to 2.
Description
Use the timer wait command to set the timeout time of a detection.
Example
# Set the timeout time to 3 seconds for detecting group 3.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] detect-group 10
[Quidway-detect-group-10] timer wait 3