Command Manual - Network Protocol
Quidway S3500 Series Ethernet Switches Chapter 6 DHCP Configuration Commands
Huawei Technologies Proprietary
6-14
6.2.13 display dhcp server expired
Syntax
display dhcp server expired { ip ip-address | pool [ pool-name ] | interface
[ vlan-interface vlan_id ] | all }
View
Any view
Parameter
ip ip-address: Specifies an IP address.
pool [ pool-name ]: Name of a global address pool. If no address pool is specified, all
the global address pools apply.
interface [ vlan-interface vlan_id ]: Specifies a per-interface DHCP address pool by
specifying VLAN interface. If no interface is specified, address pools on all VLAN
interfaces apply.
all: All DHCP address pools.
Description
Using the display dhcp server expired command, you can view information of
expired leases in DHCP address pools. After all the available addresses in a DHCP
address pool are allocated, the DHCP server allocates addresses in the expired leases
to clients.
Example
# Display information of expired leases in DHCP address pools.
<Quidway> display dhcp server expired all
Global pool:
IP address Hardware address Lease expiration Type
Interface pool:
IP address Hardware address Lease expiration Type
Table 6-2 Description of the output of display dhcp server expired
Field Description
Global pool
Information of expired address leases in global address pools
Interface pool
Information of expired address leases in VLAN interface
address pools
IP address
IP address in a binding
Hardware address
MAC address in a binding
Lease expiration
Lease expiration time
To Next Page
Loading...
Need help?
General
