Huawei quidway s3526 series

Command Manual - Network Protocol
Quidway S3500 Series Ethernet Switches Chapter 6 DHCP Configuration Commands
Huawei Technologies Proprietary
6-8
Example
# Forbid the IP addresses in the range of 10.110.1.1 to 10.110.1.63 to participate in
automatic address allocation.
[Quidway] dhcp server forbidden-ip 10.110.1.1 10.110.1.63
6.2.6 dhcp server ip-pool
Syntax
dhcp server ip-pool pool-name
undo dhcp server ip-pool pool-name
View
System view
Parameter
pool-name: DHCP pool name, a string of 1 to 35 characters that uniquely identifies an
address pool.
Description
Using the dhcp server ip-pool command, you can create a DHCP address pool and
access the DHCP address pool view. Using the undo dhcp server ip-pool command,
you can delete the specified address pool.
By default, no DHCP global address pool is created.
For the related command, see dhcp enable.
Example
# Create DHCP address pool 0.
[Quidway] dhcp server ip-pool 0
[Quidway-dhcp-0]
6.2.7 dhcp server nbns-list
Syntax
Following is the command for configuring in VLAN interface view a NetBIOS server
address list in the DHCP address pool on the current VLAN interface:
dhcp server nbns-list ip-address [ ip-address ]
undo dhcp server nbns-list { ip-address | all }
Following is the command for configuring in system view a NetBIOS server address list
in DHCP address pools on multiple VLAN interfaces: