Huawei quidway s3526 series User Manual

Command Manual - QoS/ACL
Quidway S3500 Series Ethernet Switches Chapter 2 QoS Commands
Huawei Technologies Proprietary
2-13
Example
# Clear the statistics information about ACL 2000.
<Quidway> reset traffic-statistic ip-group 2000
2.1.13 traffic-priority
Syntax
traffic-priority { ip-group { acl-number | acl-name } [ rule rule ] | link-group
{ acl-number | acl-name } [ rule rule ] } local-precedence pre-value
undo traffic-priority { ip-group { acl-number | acl-name } [ rule rule ] | link-group
{ acl-number | acl-name } [ rule rule ] }
View
System view
Parameter
ip-group { acl-number | acl-name } [ rule rule ]: Specifies a basic or advanced ACL.
acl-number: Specifies the ACL sequence number, ranging from 2000 to 3999. acl-name:
Specifies the ACL name with a character string starting with English letters ([a-z, A-Z])
and excluding space and quotation mark. rule rule: Specifies a rule of an ACL, ranging
from 0 to 127. If you do not set this parameter, all the rules will be considered.
link-group { acl-number | acl-name } [ rule rule ]: Specifies a Layer-2 ACL. acl-number:
Specifies the ACL sequence number, ranging from 4000 to 4999, acl-name: Specifies
the ACL name with a character string starting with English letters ([a-z, A-Z]) and
excluding space and quotation mark. rule rule: Specifies a rule of an ACL, ranging from
0 to 127. If you do not set this parameter, all the rules will be considered.
local-precedence pre-value: Specifies the local preference, ranging from 0 to 7.
Description
Using traffic-priority command, you can activate ACL and tag the traffic priority
(whose action is permit). Using undo traffic-priority command, you can cancel the
traffic priority settings.
For the related command, see display qos-global traffic-priority.
Example
# Marks the priority for the packets matching the permit rules of ACL 2000. It sets the
local preference to 0:
[Quidway] traffic-priority ip-group 2000 local-precedence 0

Huawei quidway s3526 series Specifications

General

MAC Address Table	8K
VLAN	4K
Weight	4.5 kg
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% (non-condensing)
Storage Humidity	5% to 95% (non-condensing)
Layer	3
Ports	24 x 10/100BASE-TX, 2 x 1000BASE-X
Power Supply	AC 100-240V

Summary

Chapter 1 Logging in Switch Commands

1.1 Logging in Switch Commands

Introduces commands for logging into the switch.

Chapter 1 Ethernet Port Configuration Commands

1.1 Ethernet Port Configuration Commands

Covers commands for configuring Ethernet ports.

Chapter 1 VLAN Configuration Commands

1.1 VLAN Common Configuration Commands

Details common VLAN configuration commands.

1.2 Protocol-Based VLAN Configuration Commands

Covers protocol-based VLAN configuration.

Chapter 1 IP Address Configuration Commands

1.1 IP Address Configuration Commands

Details commands for IP address configuration.

Chapter 1 Static Route Configuration Commands

1.1 Display Commands of the Routing Table

Covers commands to display the routing table.

1.2 Static Route Configuration Commands

Details commands for configuring static routes.

Chapter 1 Stack Function Configuration Commands

1.1 Stack Function Configuration Commands

Covers commands for stack function configuration.

Chapter 1 MSTP Configuration Commands

1.1 MSTP Configuration Commands

Details MSTP configuration commands.

Chapter 1 802.1x Configuration Commands

1.1 802.1x Configuration Commands

Covers 802.1x configuration commands.

Chapter 2 Portal Configuration Commands

2.1 Portal Configuration Commands

Details commands for Portal configuration.

Chapter 3 AAA & RADIUS Protocol Configuration Commands

3.1 AAA Configuration Commands

Covers AAA configuration commands.

3.2 RADIUS Protocol Configuration Commands

Details RADIUS protocol configuration commands.

Chapter 5 HABP Configuration Commands

5.1 HABP Commands

Details HABP configuration commands.

Chapter 6 System-guard Configuration Commands

6.1 System-guard Configuration Commands

Covers system-guard configuration commands.

Chapter 1 VRRP Configuration Commands

1.1 VRRP Configuration Commands

Details VRRP configuration commands.

Chapter 1 File System Management Commands

1.1 File System

Covers file system management commands.

1.2 Configuration File Management Commands

Details commands for managing configuration files.

1.3 FTP Server Configuration Commands

Covers FTP server configuration commands.

1.4 FTP Client Commands

Details FTP client commands.

1.5 TFTP Configuration Commands

Covers TFTP configuration commands.

Chapter 2 MAC Address Table Management Commands

2.1 MAC Address Table Management Commands

Details MAC address table management commands.

Chapter 3 Device Management Commands

3.1 Device Management Commands

Covers device management commands.

Chapter 4 System Maintenance Commands

4.1 Basic System Configuration and Management Commands

Details basic system configuration and management.

Chapter 4 System Debug Commands

4.3 System Debug Commands

Covers system debug commands.

Chapter 5 SNMP Configuration Commands

5.1 SNMP Configuration Commands

Details SNMP configuration commands.

Chapter 6 RMON Configuration Commands

6.1 RMON Configuration Commands

Covers RMON configuration commands.

Chapter 7 NTP Configuration Commands

7.1 NTP Configuration Commands

Details NTP configuration commands.

Chapter 8 SSH Configuration Commands

8.1 SSH Configuration Commands

Covers SSH configuration commands.

Chapter 1 Auto Detect Configuration Commands

1.1 Auto Detect Configuration Commands

Details auto detect configuration commands.

Chapter 2 Auto Detect Implementation Commands

2.1 NDP Configuration Commands

Configuration commands for NDP.

2.2 NTDP Configuration Commands

Configuration commands for NTDP.

2.3 Cluster Configuration Commands

Details cluster configuration commands.