Command Manual - Security
Quidway S3500 Series Ethernet Switches Chapter 3 AAA & RADIUS Protocol Configuration Commands
Huawei Technologies Proprietary
3-21
View
RADIUS scheme view
Parameter
data: Set data unit.
byte: Set 'byte' as the unit of data flow.
giga-byte: Set 'giga-byte' as the unit of data flow.
kilo-byte: Set 'kilo-byte' as the unit of data flow.
mega-byte: Set 'mega-byte' as the unit of data flow.
packet: Set data packet unit.
giga-packet: Set 'giga-packet' as the unit of packet flow.
kilo-packet: Set 'kilo-packet' as the unit of packet flow.
mega-packet: Set 'mega-packet' as the unit of packet flow.
one-packet: Set 'one-packet' as the unit of packet flow.
Description
Using data-flow-format command, you can configure the unit of data flow that send to
RADIUS Server. Using undo data-flow-format command, you can restore the unit to
the default setting.
By default, the data unit is byte and the data packet unit is one-packet.
For the related command, see display radius.
Example
# Set the unit of data flow that send to RADIUS Server Huawei is kilo-byte and the data
packet unit is kilo-packet.
[Quidway-radius-huawei] data-flow-format data kilo-byte packet kilo-packet
3.2.4 display local-server statistics
Syntax
display local-server statistics
View
Any view
Parameter
None
To Next Page
Loading...
Need help?
General
