Command Manual - Security
Quidway S3500 Series Ethernet Switches Chapter 3 AAA & RADIUS Protocol Configuration Commands
Huawei Technologies Proprietary
3-42
View
RADIUS scheme view
Parameter
minute: Real-time accounting interval, ranging from 3 to 60 and measured in minutes.
By default, the value is 12. It must be a multiple of 3.
Description
Using timer realtime-accounting command, you can configure the real-time
accounting interval. Using undo timer realtime-accounting command, you can
restore the default interval.
To implement real-time accounting, it is necessary to set a real-time accounting interval.
After the attribute is set, NAS will transmit the accounting information of online users to
the RADIUS server regularly.
The value of minute is related to the performance of NAS and RADIUS server. The
smaller the value is, the higher the requirement for NAS and RADIUS server is. When
there are a large amount of users (more than 1000, inclusive), we suggest a larger
value. The following table recommends the ratio of minute value to number of users.
Table 3-2 Recommended ratio of minute to number of users
Number of users Real-time accounting interval (minute)
1 to 99 3
100 to 499 6
500 to 999 12
≥1000 ≥15
For the related commands, see retry realtime-accounting , radius scheme.
Example
# Set the real-time accounting interval of RADIUS scheme, “huawei”, to 15 minutes.
[Quidway-radius-huawei] timer realtime-accounting 15
3.2.28 user-name-format
Syntax
user-name-format { with-domain | without-domain }
View
RADIUS scheme view
To Next Page
Loading...
Need help?
General
