Huawei quidway s3526 series

Command Manual - System Management
Quidway S3500 Series Ethernet Switches Chapter 4 System Maintenance Commands
Huawei Technologies Proprietary
4-29
4.5.12 info-center timestamp
Syntax
info-center timestamp { log | trap | debugging } { boot | date | None }
undo info-center timestamp { log | trap | debugging }
View
System view
Parameter
log: Log information.
trap: Trap information.
debugging: Debugging information.
boot: Time elapsing after system starts. Format: xxxxxx.yyyyyy, xxxxxx is the high 32
bits of the elapsed time (in milliseconds) after system starts, and yyyyyy is the low 32
bits.
date: Current system date and time. It shows as yyyy/mm/dd-hh:mm:ss in Chinese
environment and mm/dd/yyyy-hh:mm:ss in Western language environment.
None: No timestamp format.
Description
Using info-center timestamp command, you can configure the timestamp output
format in debugging/trap information. Using undo info-center timestamp command,
you can disable the output of timestamp field.
By default, datetime stamp is used.
Example
# Configure the debugging information timestamp format as boot.
[Quidway] info-center timestamp debugging boot
4.5.13 info-center trapbuffer
Syntax
info-center trapbuffer [ size buffersize ] [ channel { channel-number |
channel-name } ]
undo info-center trapbuffer [ channel | size ]
View
System view