Huawei quidway s3526 series User Manual

Command Manual - Integrated Management
Quidway S3500 Series Ethernet Switches Chapter 1 Stack Function Configuration Commands
Huawei Technologies Proprietary
1-1
Chapter 1 Stack Function Configuration
Commands
1.1 Stack Function Configuration Commands
1.1.1 display stacking
Syntax
display stacking [ members ]
View
Any view
Parameter
members: Display stack member information. It is omitted for the slave switches.
Description
Using display stacking command, you can view the stack status information of the
master switch or slave switches in a stack.
When using this command on the master switch without members, the displayed
information will indicate that the local switch is the master switch and indicate the
number of switches in the stack. Using the command with members, the member
information of the stack will be displayed, including stack number of master/slave
switches, stack name, stack device name, MAC address and status.
When using this command on a slave switch, the displayed information will indicate that
the local switch is a slave switch of the stack, indicate the stack number of the switch
and MAC address of the master switch in the stack.
Example
# Display the stack information on the master switch.
<stack_0.Quidway> display stacking
Main device for stack.
Total members:2
# Display the stack member information on the master switch.
<stack_0.Quidway> display stacking members
Member number: 0
Name:stack_0.Quidway
Device:Quidway S3526

Huawei quidway s3526 series Specifications

General

Brand	Huawei
Model	quidway s3526 series
Category	Network Router
Language	English