Command Manual - Security
Quidway S3500 Series Ethernet Switches Chapter 3 AAA & RADIUS Protocol Configuration Commands
Huawei Technologies Proprietary
3-13
View
VLAN view
Parameter
string: Name of the delivered VLAN.
Description
Using name command, you can configure name of the delivered VLAN.
Among S3500 series ethernet switches, S3552G, S3552P, S3528G, S3528P, S3526E,
S3526E FM, S3526E FS and S3526C support this command, and S3526, S3526 FM
and S3526 FS don’t.
For the related commands, see vlan-assignment-mode.
Example
# Configure name of the delivered VLAN
[Quidway-vlan100] name test
3.1.13 password
Syntax
password { simple | cipher } password
undo password
View
Local user view
Parameter
simple: Specifies to display passwords in simple text.
cipher: Specifies to display passwords in cipher text.
password: Defines a password, which is a character string of up to 16 characters if it is
in simple text and of up to 24 characters if it is in cipher text.
Description
Using password command, you can configure a password for local users. Using undo
password command, you can cancel the specified password.
If local-user password-display-mode cipher-force has been adopted, the user
efforts of using the password command to set the password display mode to simple
text (simple) will render useless.
For the related command, see display local-user.
To Next Page
Loading...
Need help?
General
