Command Manual - QoS/ACL
Quidway S3500 Series Ethernet Switches Chapter 2 QoS Commands
Huawei Technologies Proprietary
2-4
Matches: acl std1 rule 1 running
Mirrored to: Ethernet0/1
Table 2-2 the display Information
Field Description
mirrored-to
Matches: acl std1 rule 0 running
Mirrored to: Ethernet0/1
Matches: acl std1 rule 1 running
Mirrored to: Ethernet0/1
Indicates the mirroring configuration of the
switch. “Matches: acl std1 rule 0 running”
indicates the classification rule to the traffic.
“Mirrored to: Ethernet0/1” indicates the
monitor port for the packets matching the
classification rule.
2.1.4 display qos-global traffic-priority
Syntax
display qos-global traffic-priority
View
Any view
Parameter
None
Description
Using display qos-global traffic-priority command, you can view the settings of
traffic priority.
This command is used for displaying the settings of traffic priority. The information
displayed includes the ACL corresponding to the traffic tagged with priority, priority type
and value.
For the related command, see traffic-priority.
Example
# Display the settings of traffic priority.
<Quidway> display qos-global traffic-priority
traffic-priority
Matches: acl std1 rule 0 running
Priority action: Local precedence 0
Matches: acl std1 rule 1 running
Priority action: Local precedence 0
To Next Page
Loading...
Need help?
General
