Command Manual - Network Protocol
Quidway S3500 Series Ethernet Switches Chapter 6 DHCP Configuration Commands
Huawei Technologies Proprietary
6-3
6.1.3 dhcp server detect
Syntax
dhcp server detect
undo dhcp server detect
View
System view
Parameter
None
Description
Using the dhcp server detect command, you can enable pseudo-DHCP server
detection. Using the undo dhcp server detect command, you can disable the
function.
By default, pseudo-DHCP server detection is disabled.
Example
# Enable pseudo-DHCP server detection.
[Quidway] dhcp server detect
6.2 DHCP Server Configuration Commands
6.2.1 debugging dhcp server
Syntax
debugging dhcp server { all | error | event | packet }
undo debugging dhcp server { all | error | event | packet }
View
User view
Parameter
all: All DHCP server debugging.
error: Debugging of the DHCP server on such errors as occurring in DHCP message
processing and address allocation.
events: Debugging of the DHCP server on such events as address allocation and
timeout of a ping attempt.
To Next Page
Loading...
