Huawei quidway s3526 series User Manual

Command Manual - Network Protocol
Quidway S3500 Series Ethernet Switches Chapter 9 Access Management Configuration Commands
Huawei Technologies Proprietary
9-6
9.1.7 display am user-bind
Syntax
display am user-bind [ interface { interface-name | interface-type interface-number } |
mac-addr mac | ip-addr ip ]
View
Any view
Parameter
interface-name: Specifies the port name in the interface-name= interface-type
interface-number format. interface-type: Specifies the port type. interface-number:
Specifies the port number. For parameter description, refer to the interface command.
mac: MAC address.
ip: IP address.
Description
Using display am user-bind command, you can view Port, IP address and MAC
address binding information.
Note that S3526E/S3526C switches support this command.
Example
# Display binding information of Ethernet0/1 port.
<Quidway> display am user-bind interface ethernet0/1
Mac IP Port
NULL 129.10.1.1 Ethernet0/1
9.1.8 port-isolate enable
Syntax
port-isolate enable
undo port-isolate enable
View
VLAN view
Parameter
None

Huawei quidway s3526 series Specifications

General

Brand	Huawei
Model	quidway s3526 series
Category	Network Router
Language	English