Command Manual - System Management
Quidway S3500 Series Ethernet Switches Chapter 5 SNMP Configuration Commands
Huawei Technologies Proprietary
5-10
notifyview: Specify the notify view name, ranging from 1 to 32 bytes.
acl acl-list:Set access control list for this group name.
Description
Using snmp-agent group command, you can configure a new SNMP group, that is, to
map SNMP user to SNMP view. Using undo snmp-agent group command, you can
cancel a specified SNMP group.
For the following reasons:
z snmp-agent target-host command automatically generates a notifyview for user
and adds it to the corresponding group.
z Any change of the SNMP group notify view will affect all the users related to this
group.
Please do not specify the notify view when configuring SNMP group.
Example
# Create an SNMP group named huawei.
[Quidway] snmp-agent group v3 huawei.
5.1.13 snmp-agent mib-view
Syntax
snmp-agent mib-view { included | excluded } view-name oid-tree
undo snmp-agent mib-view view-name
View
System view
Parameter
included: Include this MIB subtree.
excluded: Exclude this MIB subtree.
view-name: Specify the view name, with a character string, ranging from 1 to 32
characters.
oid-tree: MIB object subtree. It can be a character string of the variable OID, or a
variable name, ranging from 1 to 255 characters.
Description
Using snmp-agent mib-view command, you can create or update the view information.
Using undo snmp-agent mib-view command, you can cancel the view information
By default, the view name is v1default. OID is 1.3.6.1.
To Next Page
Loading...
Need help?
General
