Command Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-10
View
Any view
Parameter
None
Description
Using display ospf abr-asbr command, you can view the information about the ABR
and ASBR of OSPF.
Example
# Display the information of the OSPF area border routers and autonomous system
border routers.
<Quidway> display ospf abr-asbr
Routing Table to ABR and ASBR
I = Intra i = Inter A = ASBR B = ABR S = SumASBR
Destination Area Cost Nexthop Interface
IA 2.2.2.2 0.0.0.0 10 10.153.17.89 Vlan-interface1
Table 3-1 Description of information generated by the command display ospf
abr-asbr
Field Description
Destination Router ID of the ABR or ASBR
Area Area where the router is connected with ASBR
Cost The routing overhead value of the route
Nexthop Nexthop address to the destination
Interface The local output interface
3.1.14 display ospf asbr-summary
Syntax
display ospf asbr-summary [ ip-address mask ]
View
Any view
Parameter
ip-address: Matched IP address in dotted decimal format.
mask: IP address mask in dotted decimal format.
To Next Page
Loading...
Need help?
General
