Command Manual - System Management
Quidway S3500 Series Ethernet Switches Chapter 6 RMON Configuration Commands
Huawei Technologies Proprietary
6-6
For the related commands, see rmon prialarm.
Example
# display alarm information about extended RMON.
<Quidway> display rmon prialarm
Prialarm table 1 owned by HUAWEI is VALID.
Samples absolute value : .1.3.6.1.2.1.16.1.1.1.4.1
Sampling interval : 10(sec)
Rising threshold : 1000(linked with event 1)
Falling threshold : 100(linked with event 1)
When startup enables : risingOrFallingAlarm
This entry will exist : forever.
Latest value : 0
Table 6-5 Output description of the display rmon prialarm command
Field Description
Prialarm table 1 Index of extended alarm entry.
owned by HUAWEI Creator of the extended alarm entry.
VALID The entry corresponding to the index is valid.
Samples absolute value
Sampling the absolute value of the node
1.3.6.1.2.1.16.1.1.1.4.1
Rising threshold
Rising threshold. When sampling value rises from
normal value to this threshold, rising threshold alarm will
be triggered.
Falling threshold
Falling threshold. When sampling value decreases from
normal value to this threshold, falling threshold alarm will
be triggered.
linked with event 1
Corresponding event index of ring and falling threshold
alarm.
When startup enables:
risingOrFallingAlarm
Kind of first alarm. It may trigger rising threshold alarm or
falling threshold alarm or both.
This entry will exist
forever
The lifespan of this alarm entry which can be forever or a
specified period of time.
Latest value : 0 The value of the latest sampling.
6.1.6 display rmon statistics
Syntax
display rmon statistics [ port-num ]
To Next Page
Loading...
Need help?
General
