Command Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-27
Table 3-14 Description of information generated by the command display ospf
routing
Field Description
Destination Destination network segment
Cost Cost of route
Type Type of route
NextHop Next hop of route
AdvRouter Router ID of the router advertising the route
Area Area ID
Intra Area Number of intra-area routes
Inter Area Number of inter-area routes
ASE Number of external routes
NSSA Number of NSSA routes
3.1.25 display ospf vlink
Syntax
display ospf vlink
View
Any view
Parameter
None
Description
Using display ospf vlink command, you can view the information about OSPF virtual
links.
Example
# View OSPF virtual links information.
<Quidway> display ospf vlink
Virtual-link Neighbor-id -> 2.2.2.2, State: Full
Cost: 0 State: Full Type: Virtual
Transit Area: 0.0.0.2
Timers: Hello 10, Dead 40, Poll 0, Retransmit 5, Transmit Delay 1