Command Manual - Port
Quidway S3500 Series Ethernet Switches Chapter 1 Ethernet Port Configuration Commands
Huawei Technologies Proprietary
1-10
Description
Using the flow-interval command, you can configure a time interval. When calculating
port statistics information, the switch calculates the average port speed during the time
interval. Using the undo flow-interval command, you can restore the default value.
For the related command, see display interface.
Example
# Configure the time interval to 100 seconds on Ethernet0/1.
[Quidway-Ethernet0/1] flow-interval 100
1.1.11 interface
Syntax
interface { interface_type interface_num | interface_name }
View
System view
Parameter
interface_type: Specifies the port type. It can be Ethernet or GigabitEthernet.
interface_num: Specifies the port number. It adopts slot number/port number format.
For S3526, S3526E and S3526C Ethernet Switches, the slot number ranges from 0 to
2. Slot 0 contains the fixed Ethernet ports provided by the switch and the port number
ranges from 1 to 24. Slot 1 or 2 represents the extended Ethernet ports provided by the
two extended modules on the rear panel and the port number can only be 1. For S3526
FM and S3526 FS Ethernet Switches, the slot number ranges from 0 to 4. Slot 0
contains the fixed Ethernet ports provided by the switch and the port number ranges
from 1 to 12. Slot 1 or 2 represents the extended Ethernet ports provided by the two
extended modules on front panel respectively and the port number range from 1 to 6.
Slot 3 or 4 represents the extended Ethernet ports provided by the two extended
modules on rear panel respectively and the port number can only be 1. For S3552G
and S3552P Ethernet Switches, the slot number ranges from 0 to 1. Slot 0 contains the
100M Ethernet ports provided by the switch and the port number ranges from 1 to 48.
Slot 1 contains the 1000M Ethernet ports provided by the switch and the port number
ranges from 1 to 4. For S3528G and S3528P Ethernet Switches, the slot number
ranges from 0 to 1. Slot 0 contains the 100M Ethernet ports provided by the switch and
the port number ranges from 1 to 24. Slot 1 contains the 1000M Ethernet ports provided
by the switch and the port number ranges from 1 to 4. For S3552F Ethernet Switch, the
slot number ranges from 1 to 7. Slot 1 to 6 represent the 100M Ethernet ports provided
by the six modules on front panel respectively and the port number range from 1 to 8.
To Next Page
Loading...
Need help?
General
