Command Manual - System Management
Quidway S3500 Series Ethernet Switches Chapter 8 SSH Configuration Commands
Huawei Technologies Proprietary
8-11
Parameter
times: Specifies authentication retry times, in the range of 1~5.
Description
Using the ssh server authentication-retries command, you can define SSH
authentication retry times value, which takes effect at next logon. Using the undo ssh
server authentication-retries command, you can restore the default retry value.
By default, it is 3.
For the related command, see display ssh server.
Example
# Define the authentication retry times value as 4.
<Quidway>system-view
System View: return to User View with Ctrl+Z.
[Quidway] ssh server authentication-retries 4
[Quidway]
8.1.14 ssh server rekey-interval
Command
ssh server rekey-interval hours
undo ssh server rekey-interval
View
System view
Parameter
hours: Defines key update interval, in the range of 1~24 hours.
Description
Using the ssh server rekey-interval command, you can define update interval of
server key pair. Using the undo ssh server rekey-interval command, you can cancel
the current setting.
By default, system doesn’t update the server key.
For the related commands, see display ssh server.
Example
# Define update interval of server key pair as 3 hours.
<Quidway>system-view
System View: return to User View with Ctrl+Z.
To Next Page
Loading...
