Command Manual - Multicast
Quidway S3500 Series Ethernet Switches Chapter 2 IGMP Snooping Configuration Commands
Huawei Technologies Proprietary
2-7
Example
# Configure ACL 2000 to permit the accessing to multicast group
225.0.0.0~225.255.255.255.
z Configure ACL
[Quidway] acl number 2000
[Quidway-acl-basic-2000] rule permit source 225.0.0.0 0.255.255.255
z Create VLAN 2, and add Ethernet 0/1 to it.
[Quidway] vlan 2
[Quidway-vlan2] port Ethernet 0/1
z Set the filtering of IGMP Snooping Report packets applied to ACL 2000 of VLAN 2
on Ethernet 0/1.
[Quidway] interface Ethernet 0/1
[Quidway-Ethernet0/1] igmp-snooping group-policy 2000 vlan 2
# Configure ACL 2001 to deny the accessing to multicast group
225.0.0.0~225.255.255.255 and permit the accessing outside the range.
z Configure ACL
[Quidway] acl number 2001
[Quidway-acl-basic-2001] rule deny source 225.0.0.0 0.0.0.255
[Quidway-acl-basic-2001] rule permint source any
z Create VLAN 2, and add Ethernet 0/2 to it.
[Quidway] vlan 2
[Quidway-vlan2] port Ethernet 0/2
z Set the filtering of IGMP Snooping Report packets applied to ACL 2001 of VLAN 2
on Ethernet 0/2.
[Quidway] interface Ethernet 0/2
[Quidway-Ethernet0/2] igmp-snooping group-policy 2001 vlan 2
2.1.8 igmp-snooping host-aging-time
Syntax
igmp-snooping host-aging-time seconds
undo igmp-snooping host-aging-time
View
System view
Parameter
seconds: Specifies the port aging time of the multicast group member, ranging from 200
to 1000 and measured in seconds; By default, 260.
To Next Page
Loading...
