Command Manual - System Management
Quidway S3500 Series Ethernet Switches Chapter 1 File System Management Commands
Huawei Technologies Proprietary
1-4
-rwxrwxrwx 1 noone nogroup 971 Sep 20 2003 14:28:52 test.txt
7932928 bytes total (4966400 bytes free)
# Display information about all the files (including the deleted files) in the directory
flash:/test/
<Quidway> dir /all flash:/test/
Directory of flash:/test/
-rwxrwxrwx 1 noone nogroup 971 Sep 20 2003 14:28:52 test.txt
7932928 bytes total (4966400 bytes free)
# Display information of all the files (including the deleted files) with the names starting
with "t" in flash:/test/
<Quidway> dir /all flash:/test/t*
Directory of flash:/test/t*
-rwxrwxrwx 1 noone nogroup 971 Sep 20 2003 14:32:49 [text.txt]
7932928 bytes total (4965376 bytes free)
1.1.5 file prompt
Syntax
file prompt { alert | quiet }
View
System view
Parameter
alert: Perform interactive confirmation on dangerous file operations; The default value
is alert, which configures to perform interactive confirmation on dangerous file
operations.
quiet: Do not prompt for the file operations.
Description
Using file prompt command, you can modify prompt modes of the file operation on the
Ethernet switch.
If the prompt mode is set as quiet, that is, no prompt for file operations, some
non-recoverable operations may lead to system damage.
Example
# Configure the prompt mode of file operation as quiet.
[Quidway] file prompt quiet
To Next Page
Loading...
Need help?
General
