Command Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches Chapter 5 IP Routing Policy Configuration Commands
Huawei Technologies Proprietary
5-7
5.1.9 display ip ip-prefix
Syntax
display ip ip-prefix [ ip-prefix-name ]
View
Any view
Parameter
ip-prefix-name: Specifies displayed address prefix list name.
Description
Using display ip ip-prefix command, you can view the address prefix list.
For the related commands, see ip ip-prefix.
Example
# Display the information of the address prefix list named as p1.
<Quidway> display ip ip-prefix p1
name index conditions ip-prefix / mask GE LE
p1 10 permit 10.1.0.0/16 17 18
Table 5-1 Description of information generated by the command display ip ip-prefix
Field Description
name Name of ip-prefix
index Internal sequence number of ip-prefix
conditions Mode: permit or deny
ip-prefix / mask Address and network segment length of ip-prefix
GE Greater-equal value of ip-prefix network segment length
LE Less-equal value of ip-prefix network segment length
5.1.10 display route-policy
Syntax
display route-policy [ route-policy-name ]
View
Any view