Command Manual - System Management
Quidway S3500 Series Ethernet Switches Chapter 6 RMON Configuration Commands
Huawei Technologies Proprietary
6-1
Chapter 6 RMON Configuration Commands
6.1 RMON Configuration Commands
6.1.1 display rmon alarm
Syntax
display rmon alarm [ alarm-table-entry ]
View
Any view
Parameter
alarm-table-entry: Alarm table entry index.
Description
Using display rmon alarm command, you can view RMON alarm information.
For the related commands, see rmon alarm.
Example
# Display the RMON alarm information.
<Quidway> display rmon alarm
Alarm table 1 owned by HUAWEI is VALID.
Samples absolute value : 1.3.6.1.2.1.16.1.1.1.4.1 <etherStatsOctets.1>
Sampling interval : 10(sec)
Rising threshold : 1000(linked with event 1)
Falling threshold : 100(linked with event 1)
When startup enables : risingOrFallingAlarm
Latest value : 0
Table 6-1 Output description of the display rmon alarm command
Field Description
Alarm table 1 Index 1 in the alarm table
HUAWEI Owner
VALID The entry corresponding to the index is valid
Samples absolute
value
Sampling the absolute value of the node
1.3.6.1.2.1.16.1.1.1.4.1
Sampling interval The interval of sampling the value