Huawei quidway s3526 series User Manual

Command Manual - System Management
Quidway S3500 Series Ethernet Switches Chapter 7 NTP Configuration Commands
Huawei Technologies Proprietary
7-4
7.1.4 display ntp-service trace
Syntax
display ntp-service trace
View
Any view
Parameter
None
Description
Using display ntp-service trace command, you can display the brief information about
every NTP server on the way from the local equipment to the reference clock source.
Example
<Quidway> display ntp-service trace
server 127.0.0.1,stratum 8, offset 0.000000, synch distance 0.00000
refid 127.127.1.0
7.1.5 ntp-service access
Syntax
ntp-service access { query | synchronization | server | peer } acl-number
undo ntp-service access { query | synchronization | server | peer }
View
System view
Parameter
query: Allow to control query authority.
synchronization: Only allow the server to access.
server: Allow query to server and access.
peer: Full access authority.
acl-number: The IP address list number, ranging from 2000 to 2999.
Description
Using ntp-service access command, you can set the authority to access the local
equipment. Using undo ntp-service access command, you can cancel the access
authority settings.

Huawei quidway s3526 series Specifications

General

Brand	Huawei
Model	quidway s3526 series
Category	Network Router
Language	English