Command Manual - Network Protocol
Quidway S3500 Series Ethernet Switches Chapter 6 DHCP Configuration Commands
Huawei Technologies Proprietary
6-37
Example
# Enable DHCP servers to share the load.
[Quidway] ip relay address cycle
6.3.12 reset dhcp relay statistics
Syntax
reset dhcp relay statistics
View
User view
Parameter
None
Description
Using the reset dhcp relay statistics command, you can clear the statistics
information about DHCP relay.
For the related command, see display dhcp relay statistics.
Example
# Clear the statistics information about DHCP relay.
<Quidway> reset dhcp relay statistics