Command Manual - QoS/ACL
Quidway S3500 Series Ethernet Switches Chapter 1 ACL Commands
Huawei Technologies Proprietary
1-17
Table 1-8 the display Information
Field Description
Basic ACL 2010, 1
rule,
rule 1 permit
10.0.0.1 0 (0 times
matched)
“Basic ACL” delegates the type of ACL, the type of ACL
can be “advanced ACL”, “Basic ACL”, “Interface based
ACL” or “Link ACL”. “2010” indicates the number of ACL
( in this location, it may be the name of the ACL) , “1 rule”
indicates the rule number of the ACL. “ rule 1 permit
10.0.0.1 0 (0 times matched)” indicates the rule’s content
1.2.3 display acl running-packet-filter all
Syntax
display acl running-packet-filter all
View
Any view
Parameter
None
Description
Using display acl running-packet-filter all command, you can view the information
about the running state of the ACL. The displayed information includes ACL name, rule
name and running state.
Example
# Display the ACL running state on all the interfaces.
<Quidway> display acl running-packet-filter all
acl std1 rule 0 running
acl std1 rule 1 running
The display information shows all the activated ACLs of the switch.
1.2.4 display time-range
Syntax
display time-range { all | name }
View
Any view
To Next Page
Loading...
Need help?
General
